Each of the eight standard systems has a torque-speed curve including the
motor inertia for reference. This is the fundamental information that you need
to select the servo drive and matching motor for your application.

Don't forget the cables and ZIPLink break-out board kit!

Included in the ordering guide are the available connection cables from the
drive to motor in standard lengths from 10 to 60 feet. The break-out board kit
including 0.5 m (19 inch) cable for the CN1 user interface is also listed for your
convenience. We highly recommend all five items per system as a minimum.

All cables are 100% factory tested to make your system installation as easy
and quick as possible. See the Accessories section for regeneration resistors,
AC line filters, fuses, contactors, and RF noise filters.